Sno-Seal Leather Wax – Beeswax Waterproofing, 200g

Natural and effective shoe care and leather care with historic roots

Sno-Seal is a time-tested waterproofing treatment based on beeswax – a natural and sustainable raw material that has been used in professional leather care for centuries. Launched in the USA in 1933, it has earned the trust of hunters, skiers, outdoor enthusiasts, and professionals worldwide. By choosing a beeswax-based wax over modern waterproofing sprays, you get deeper protection and an eco-friendly shoe care alternative without aerosols or harmful chemicals.

Long-lasting protection and waterproofing – without damaging the leather

Sno-Seal penetrates deep into the leather fibers to form a protective barrier against rain, snow, salt, and dirt. Unlike animal-based leather grease, which can break down over time, go rancid, or weaken the leather, beeswax remains stable, preserving the leather's natural breathability and flexibility. Since Sno-Seal contains no softening oils, your boots maintain their original support and shape – making it the ideal boot care for heavy military boots and hiking boots.

Ideal shoe care for both new and used leather products

With Sno-Seal, you can extend the life of everything from hiking boots and work gloves to leather jackets and bags. The product is especially popular for caring for Hestra gloves and military gear, where demands for durability and effective waterproofing are extreme. Please note that this product is not recommended for suede, as the wax changes the texture. For nubuck, only use Sno-Seal as shoe care if you prioritize 100% waterproofing over appearance, as the leather will become darker and smooth after treatment.

Simple and effective application (Army Star Guide to boot care)

For the best results, Sno-Seal should be "melted" into the leather:

1. Clean: Ensure the leather is clean and completely dry before applying shoe care.
2. Preheat: Use a hair dryer (low heat) to warm the leather so the pores open up.
3. Apply: Apply Sno-Seal with a cloth or brush. Use an old toothbrush to massage the wax extra well into seams and stitching – this is where moisture most often penetrates.
4. Melt: Give the leather another quick pass with the hair dryer until the wax is fully absorbed.
5. Finish: Wipe off any excess wax with a clean cloth.

Pro-tip: For gloves, apply an extra layer of shoe care to the fingertips and palms, as these areas face the most wear and moisture.

Remove white salt stains from your boots

Winter road salt is leather's worst enemy. The salt draws moisture out of the leather, leaving white stains that can cause the material to dry out and crack. If your boots already have salt stains, follow this guide for effective shoe care:

• The Mixture: Mix equal parts lukewarm water and white distilled vinegar.
• Clean: Use a well-wrung cloth. It is important not to "drown" the leather, but simply moisten the surface until the salt is dissolved.
• Protect (Important): Vinegar removes the salt but can also strip some of the leather's natural oils. It is therefore essential to apply Sno-Seal waterproofing immediately after cleaning to restore protective wax to the clean leather.

Shoe Care FAQ:

Can Sno-Seal be used on Gore-Tex® boots? Yes. Sno-Seal contains no silicone or leather grease that clogs the pores of a breathable membrane. It protects the outer leather layer while allowing the membrane to "breathe."

Good to know about your shoe care:

• Content: 200 grams (7 oz)
• Origin: USA (Since 1933)
• Material: 100% pure beeswax – a sustainable alternative to waterproofing sprays
• Storage: Sno-Seal has an almost unlimited shelf life and does not go rancid like traditional leather grease.